Posts by secure_admin

Ways to Prep, Clean and Stain Your Deck 

Making sure your deck is well stained or painted helps in the protection of your deck from the nature’s elements. Without the presence of stain and paint, your deck can be easily exposed and damaged by the scorching heat of the sun in summer and the wet and moisture of rainy and winter season. 

Clean your deck 

To ensure that your staining agenda is successful, it is vital to totally clean your deck. Removing the mildew is very essential to make sure that once you start staining your deck, it holds properly. More than that, cleaning your deck properly makes a more vibrant stain or paint outcome. After cleaning, proceed to repairing things you think needs some fixing. Any screw or nail that is detached should be properly screwed again or hammered down.  

In the cleaning process, invest in a good cleaning solution. A good cleaning solution will help in making sure all the dirt is lifted and can be easily rinsed thoroughly. Once you apply the cleaning solution, put on some strength and scrub your deck. You can also use a pressure washer to clean it without exerting much effort, however you should always be extra careful with exposing your wooden deck and angle your pressure washer in the right direction.  

Water absorption test 

One test to know if your deck is ready for the application of stain or paint is through a test of water absorption. This step is simply pouring 1 cup of water to your deck’s surface and waiting it out for 10 minutes. After 10 minutes of waiting, check the surface you poured with water if it has absorbed the water it was introduced, if the water is not fully absorbed then your deck’s surface is not porous however, if the wood darkens, which is an implication that it has absorbed the water it was introduced to, then your surface is ready for the staining or painting process. 

Paint your fence or deck 

Starting with spindles and proceeding in a downward motion and direction is a way to ensure that you are avoiding lap marks. Use a brush that is three fourth in size when staining. You also have an option to use airless sprayer in staining to ensure that the pressure introduced is controlled thus resulting in a nice and consistent outcome. Rollers can also be used in the process.  

A reminder when staining or painting is to never do the job in direct sunlight. Staining or painting with having direct exposure to sunlight causes an uneven result because it will leave the parts you coated first drier than the ones you just finished. After painting or staining, you should expect the surface to dry after 2 hours, however take not to not put everything back just yet. Leaving the paint overnight is a much safer option to ensure your furniture won’t have streaks.  

If you are looking for professionals to help you with your walls or decks, Muncie Custom Painting Pros is a company just like any other painting contractors but specializes in custom painting. Connect through the website provided today to know more about their services.  

Read More

Cosmetic Enhancements Courtesy of Your Dermatologist

Dermatologists are health care professionals who can help you in taking care of your hair, skin, and nails. But while they are capable of providing medical treatments, they are mostly consulted for aesthetic purposes.

Frisco Dermatology

Do you want to know how a dermatologist can help you in enhancing your beauty? There are a few medical procedures that dermatologists perform in spas and beauty clinics that you can try out to help improve the way your skin looks. These are:

1. Chemical Peel

A chemical peel is quite popular in beauty spas these days because it allows the outer layer of your skin to peel off, thus allowing new skin to take its place. It’s one way of regenerating your skin cells or smoother and younger skin. This procedure is normally performed on sun-damaged and acne-infected skin. Some people who complain of age spots and wrinkle lines may also take advantage of this procedure.

2. Cosmetic injection

There are some naturally-occurring chemicals that can be injected into your skin to enhance its look. Very good examples are botox and collagen. Botox is known in the medical circle as botulinum toxin therapy and it addresses fine lines and wrinkles. Collagen, on the other hand, is a type of filler that can make the skin plump. It is highly recommended for patients who complain of sagging skin. However, the effects of these treatments are temporary so you’ll need to repeat the treatment on a regular basis.

3. Dermabrasion

Dermabrasion is yet another popular way of enhancing the skin. Here, the dermatologist will remove the topmost layer of your skin with the purpose of eroding scar tissues, tattoos, and fine wrinkles. Furthermore, it may also be used to remove skin patches that may cause skin cancer.

4. Hair restoration and removal

Your hair may be treated surgically if you’re suffering from hair loss. This condition is called hair transplantation. On the other hand, there are instances wherein you need to remove hair in certain parts of your body. The procedure performed for this is called electrolysis or hair epilation through laser.

5. Tumescent liposuction

While there are different types of liposuction performed today, this is still a type of procedure that is best done by a dermatologist. The purpose is to remove excess fat from the body. To do that, a local anaesthetic is injected so that the fatty issues can be sucked out. This treatment procedure is usually performed on obese individuals.

6. Cryotherapy

This newer method of skin treatment is performed to get rid of warts and skin lesions. Here, liquid nitrogen is used to destroy all skin cells that are affected. Cryotherapy provides a quick form of treatment for a lot of benign skin conditions.

If you want to enhance the way you look through any one of these methods, go see a trusted dermatologist. Go to a reputable Frisco dermatology centre and schedule an appointment with one of their experts so you can learn more about these procedures and to determine if they are the ones that you really need to stay beautiful.

Read More

When to Repair or Replace Your Broken Refrigerator

Buying a new refrigerator is not an easy (or cheap) task. As a matter of fact, homeowners usually spend weeks or even months just to save up and shop around for a great deal. And once you do find one which you prefer, it is likely a very rewarding and satisfying feeling. You leave knowing you will not have to experience the whole procedure again anytime soon since the refrigerator’s average lifespan is about ten to twenty years. But at some point in time, you’ll have to accept the unfortunate truth of the circumstance which is your refrigerator is not made to stay forever.

While a refrigerator usually does not need as much maintenance and is much stronger compared to any other home appliances such as dishwashers or trash compactors, it is not actually invincible to damage and failure from everyday wear-and-tear. Problems that arise may sometimes range from something simple such as a broken water filter or icemaker to more serious problems like overheating. Since the degree or the severity of the issues differ, it can be difficult deciding whether you must purchase a totally brand-new one or just pay for repairs. Your decision will always depend on a lot of factors which include the type and age of your refrigerator and the extent of the damage.

Overheating: An Indication that You Need to Consider Replacing an Old Refrigerator with a New One

It is a bit confusing to think that your refrigerator, something which is made to keep your beverages and foods cold, can actually overheat. However, since most refrigerators operate on a motor, it’s very possible for it to overheat. While it’s totally normal to feel a little heat when you are near at the back of your refrigerator, it must not that hot in which you would immediately pull your hand away in order to avoid being burned. One clear indication that something is not right with your refrigerator or your fridge thermometer is when you feel an extreme amount of heat that comes from your fridge.

Since the coils at the back of your refrigerator are basically insulated, they actually prevent you from experiencing too much heat. But if you notice that your fridge is abnormally heating up, you must contact a professional and experienced refrigerator repair service provider immediately to have your fridge and coils inspected. The professional repair contractor may inform you 1 of 2 things: that a repair of your refrigerator is no longer an option and it may be better for you to replace a new one, or that the issue is not that severe and you may simply repair it by replacing just the coils.

In order to prevent this from occurring, you need to make sure that your refrigerator’s condenser should be cleaned at least once a month. You should also make sure that you only trust a qualified dishwasher repair near me service provider since they are the most experienced and reputable individuals that can help you in any concerns you may have about your refrigerator or freezer.

Read More

Prevention Is The Best Way To Maintain Your Plumbing At Home

Plumbing problems are common in any household, these problems can give you headaches and can have negative effects on your daily lifestyle. Hollywood plumbing issues can get out of hand if you do not cater to the problem right away, you can end up spending a huge amount of money if you are not aware of the things that are happening within your plumbing system. There are a lot of simple things you can do that can help prevent specific plumbing problems from arising. 

 

It is normal for you to clean the cooking pans you just used right away, but a common mistake that homeowners tend to make is that they pour in the grease from the pan right into the kitchen sink. The grease can get stuck in the pipe system because it cools down quickly as it slides down the sink. This can create a clogged sink because the grease creates a cap that makes it hard for other substances to go down the drain. 

` 

What you can do aside from pouring the grease straight down the sink is that you can pour into a container and you can then properly throw it in a  garbage bin. Another life hack you can do is, try to save the milk cartons when you are done drinking it, then you can pour in the grease in there and throw right after. This way you will be saving the environment by putting trash inside other garbage before disposing of it, 

 

Drain screens are simple accessories that you on put on top of the sinkholes of kitchen sinks, showers, and bathtubs. These simple accessories are able to prevent relatively larger objects from entering the sinks that can cause clogging and there a lot of cheap drain screens made from plastic that you can purchase in your local hardware stores. These things make it easier to clean your bathroom floor from all the hair fall and other debris that a drain stopper can catch. 

 

If your grocery bill is starting to increase, then you can try to stop buying expensive bathroom cleaners and switch to baking soda. Baking soda is an ingredient that can instantly unclog your sink and it will be like nothing was ever stuck inside. All you have to do is put a small amount of baking soda in the sink holes and wash it down with warm water. Follow this up by pouring vinegar, this will dissolve any type of accumulation in the pipes that is clogging the path of water and you only have to wait for one day to see the effects. 

 

One of the common problems you will in your home will be a continuous dripping faucet, and the accumulation of all the water drops can increase your water bill. One thing you should always remember is that when you turn off the water, try not to tighten the handle too much. Leaks in the faucet are caused because the handle often breaks and it is not able to turn off the water flow completely. 

Read More

Things to Consider If you Want a Roof Garden

Little by little, the whole world is finally realizing the importance of protecting the environment and not doing harm to it. In urban architecture, engineering and design, green living has been making its way in. Although already present in some areas, roof gardens or green roofs have been implemented in urban areas due to the fact that living spaces in the city are smaller than country ones or in other places. You have to make the most of what you have.  

 

Green roofs are great because they regulate the temperature, keeping the room below cool during summer and warm during winter. They also contribute to the environment by absorbing toxic and harmful impurities in the air, and by releasing oxygen. 

 

If you want to have an outdoor living space or a garden, then you have to have a patio or roof area that’s spacious enough. But that aren’t the only requirements in building one. Here are some things to consider if you truly want a garden on your roof: 

 Local regulations and ordinances 

First and foremost, get to know local regulations and rental rules, and check in with the building’s owner if your dream roof garden is possible and permissible.  

 Ask help from professionals 

Buildings are not created equal. Or rather, constructed equal. Some buildings are not built to carry the additional load of a roof garden. Others may be able to but only in a limited amount of weight. Your architect or contractor can figure it out for you.  Contact them as soon as possible so you won’t have to waste your time and effort on false preparations. 

 Use less weight as possible 

If the building can bear the load, always start with less weight for safety and reassurance. Use recycled plastic and glass to hold your plants, recycled Styrofoam to drain water, and potting soil to plant on.  

 Figure out how the plants will be watered 

Carrying buckets of water is fine if you live right below the garden. Considering you don’t mind the weight, spills, and repetition. But if summer is just around the corner or is already at your doorsteps, then you’ll definitely need a professional to help you out. Plants need constant watering during hot days. Calling your service provider is the wisest thing to do.  

 Wind protection 

Since your garden is situated atop, you will need a windbreaker installed. The rooftop will be windy. But you don’t have to block the wind entirely. You just need the windbreakers to interrupt wind flow and decrease it. This way, both your plants and windbreakers won’t suffer damage. 

 

If you pass all the criteria then congratulations. But before you can start on your journey, you need to have a strong and well-maintained roof. Call Denver roofing repair pros or any local roofing company of your choice wherever you are to make preparations. Make the right plans and the right calls and you’ll surely bask in your new green roof. You’ll be helping the earth too. 

Read More

Recent Comments